Audi A3 Teves MK70 ATE ABS ECU Module ABS Pump Faults

Peugeot 206 / 207 Teves MK70 (ATE) ABS Pump Repair Service

Peugeot 207 Teves MK70 ATE ABS ECU Pump FaultsIf you own either a Peugeot 206 or 207, you may have experienced the failure of the infamous Teves MK70 ATE ABS pump, which unfortunately has been known to suffer the same design flaws at the earlier Teves MK60 ATE ABS pump which were known to be complete failures. Both units have internally built pressure sensors with a low maximum pressure rating, and the list below outlines the identical common failures that have been found in both units:

Common Peugeot 206 & 207 Teves MK70 ATE ABS Pump Problems:

  • Brake Pressure Sensor (C1301 or C1302)
  • No Communication Fault
  • ESP / ASR / TCS / DCS (Traction) Light On
  • Wheel Speed Sensor Faults
  • ABS Light On

Note: The above list consists of the most common faults we have found with these units, but is not a complete list of possible faults.

Sinspeed ABS Repair Service
Here at Sinspeed, if we find flaws in the original design, such as the most common failing internal G201 Brake Pressure Sensor Fault, we will not only look to repair the fault, but we will also modify the unit to ensure that the design fault has been permanently rectified to avoid any further issues regarding the same fault. To give our customers that complete peace of mind, we also offer Lifetime Warranty on all repairs!

Thousands of these units have been repaired in our workshop over the years, so to ensure a faster turnaround, we now also carry these units in stock. All of our exchange units are self-calibrating and will not require any programming.

If you have a faulty Teves MK70 ATE ABS / ESP Pump fitted to your Peugeot 206 or 207 and are looking for a repair or replacement of your damaged ABS unit, then give us a call today on 0203 815 9441.

Comments(25)

  1. Matt Harris 15 March 2023

    I have a 207 with what i suspect is a ABS pump problem.
    ANS /ESP AND NOW STEERING light all illuminated.
    Part number 9662295880. Could you please email me a price and turnaround time.
    Thank in advance
    Kind Regards Matt

  2. Ioannis Gougas 26 February 2020

    Please, can you help me find aBS pump for Peugeot 206?
    VIN code: VF32AHFXF43544279
    number of ABS: 10.0207-0036.4 and 9652342980

    thanks in advance

  3. Mark offei 8 February 2020

    Please, can you help me find aBS pump for Peugeot 206?

    VIN code: VF32EKFUA44038792
    number of ABS: 10.0960-1134.3 and 06540827405844

    Thank you.

  4. Carlos 15 October 2019

    Hi!

    I have a Peugeot 206 sE 1.6L petrol Automatic with the ABS light on. It has been diagnosed and the code returning was C1380 Pump Motor Internal Fault. The ABS model is a Teves Mk70 but not sure how to check for the serial number.

    Any info about prices, repairs and replacement are welcome.

    Many thanks!

  5. Robert Grainger 10 October 2019

    Can send you send me the cost and information for abs unit for 207 Peugeot 1.4 16v reg va06***
    Regards
    R.grainger

  6. Tony 23 May 2019

    Hi I, like so many, have a 2006 1.4 16v peugeot 207 with ‘faulty braking system’, STOP, ABS Dash light on, Faulty power steering, Speedometer which cuts out intermittently when driving. Also get no communication via ODB2 to ABS ECU. From reading its 90% likely ABS unit.
    Can you send me pricing for UK thanks.

  7. Martin Cook 1 April 2019

    I have a june 2008 Peugeot 207 1.6HDi with the “STOP – braking system fault indication”, along with airbags and seatbelts warning indication. also, diagnostic scan tool gets “communications error” when attempting to access aBS data from vehicle.

  8. Judy M 20 February 2019

    I have a Peugeot 206 SW estate (think it’s 1.4) 2004 reg. ABS light has been coming on and off past couple of years and garage has said it won’t pass MOT in May unless it is fixed or replaced. Please quote for new pump. Presumably all I then pay the garage is for the work to install it.

  9. Mike Penny 20 April 2018

    Hi
    My 206 has had a sometimes soft (and long pedal) for a while, Now I note fluid seems to be leaking from under the ABS pump.
    Could you forward solution and price details please?
    Thanks

  10. john H 4 April 2018

    Hi, I have an ABS fault ,power steering fault no speedo.
    It is a Peugeot 207 1.6 hdi 110 sport Diesel I have read it s the abs pump any help would be great ful
    Ps the email is all in small letters

  11. Andy 14 March 2018

    abs light on the Dash, dealer advises the pump is seased.

    the numbers ive found on the unit are 10.0207-0306.4 and 9652342980

  12. fabio 16 November 2017

    Hi,

    I have peugeot 207 1.6 AT and i woud like to buy ABS Pump. I live in Brasil. Could you send?

    Abs MK70 CEM 01

    10,0970-1128,3 00403088E1

    *6D39C2544B* made in Phillipines

    Thanks regards

    Fabio

  13. Wayne Styles 9 March 2017

    Hi, I have an ABS fault with the code c1380. my ABS pump has the numbers 9641871180 and 10.0207-0002.4
    It is a Peugeot 206 1.4 GLX Petrol.

    Thanks

  14. Paul 3 March 2017

    Hi , i have a Peugeot 207cc 2008 with a abs pump 9663945780, the fault i have is that the brake pedal sinks to the floor when engine starts,there are no faults stored or lights on, would the valves in the block be faulty and bypassing, I have changed master cylinder and there are no leaks so abs pump valves are the only option left

  15. Lee Power 20 February 2017

    Peugeot 206 with Teves mk 70 ABS unit 10.0207-0002.4 / 9641871180. Got the following intermittent fault read by Peugeot Planet ” Recirculation pump. Pump locked, CO, CC-or CC+ ” & ABS warning light is on. Can I have price for service / exchange unit please?

  16. Leon Gorman 22 December 2016

    Hi have a 206 gti180 with abs pump intermitant failure. Ate 10.0206-0118

  17. Russ 16 December 2016

    Got a 10.0207-0036.4 abs pump in our 206 and just failed the mot due to a persistent abs fault light on the dash. Will your repair service sort this out and if so can you give me a quote please. It looks easy enough to remove/replace but can you also tell me if there Is any particular bleeding process on replacement please.
    Many thanks
    Russ

  18. Steve 12 October 2016

    Hi I’m enquiring on the cost of a repair for a no communication fault for a Peugeot 207 ABS ECU ate MK70 CEM 00
    10.0970-1126.3
    Many Thanks

  19. Alex 27 July 2016

    Hello,

    I have a peugeot 207 m play year 2007. the SRS light is on and my garage can’t look into it and recommended me to seek help from an aBS expert. I saw your article but i obviously cannot tell if that is the problem with my car. Where are you based? Could you give me a quote if I take my car to you? How much do you charge?
    Thank you.
    Alex

  20. Heather 23 April 2016

    Hi my 2008 206 has the abs modulator problem how much am i looking at for having it repaired? We cant find a second hand part with the same part number

  21. Martin Hickey 24 March 2016

    Hi Jason

    I wanted to know if you ship these units to Australia.
    I have a 207 CC 2007 model
    Peugeot told me I need part number 4541Z3.
    Last 6 numbers on the vin number are 34044973
    What would a unit cost shipped here.
    I look forward to your response

    Regards

    Martin

  22. CB 23 February 2016

    Hello do you repair ATE MK 70 10.0970-1128.3 ?
    How much would it cost please?
    Thanks,
    CB

  23. colin 27 January 2016

    i have got peugeot 206 sw 1.4 06 56 8 valve with a ate 10.02070068.4 abs pump.
    we are having faults with 2 rear sensors replaced but still won’t put light out,also red stop flashing abs and hand brake light on. kfw engine and valeo ecu. HELP 079*******.

Add a Comment

Your email address will not be published. Required fields are marked *